AIDA64 Extreme is more of a hardware information program than a stress test tool. However, it does come with a hardware detection engine that offers plenty of heavy load tests and diagnostic functions. For starters, you can overclock your CPU and run intensive workloads to stress test the components. About Stress is a plugin which is intended to be used to help stress test Bukkit servers. It allows server owners to create a fake load on their server, which can help mimic real loads, or identify potential issues before they happen. In distributed client-server systems, testing is done across all clients from the server. The role of stress server is to distribute a set of stress tests to all stress clients and track on the status of the client. After the client contacts the server, the server adds the name of the client and starts sending data for testing. The role of stress server is to distribute a set of stress tests to all stress clients and track on the status of the client. After the client contacts the server, the server adds the name of the client and starts sending data for testing. Meanwhile, client machines send signal or heartbeat that it is connected with the server.
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- Source Code:
- https://github.com/pop4959/Stress
Web Server Stress Test
- Donation Link:
- https://www.paypal.me/pop4959
Stress is a plugin which is intended to be used to help stress test Bukkit servers. It allows server owners to create a fake load on their server, which can help mimic real loads, or identify potential issues before they happen. It does not replace proper performance profiling systems (such as Aikar's timings and Luck's spark), nor proper server optimization, but it may be used to check for noticeable differences in performance on different hosts, versions of Minecraft, server software, and configuration.
Proudly sponsored by
Bloom offers dedicated core VPS and Minecraft hosting with Ryzen 9 processors using owned hardware. Bloom’s plans include tons of storage and with fully dedicated cores, there is no limit or throttling of your CPU. Join their Discord to learn more.
Current Features
Tests for:
- chunk generation
- chunk loading
- commands
- entities
As well as detailed information about server ticks and tps:
I'm looking to improve this plugin over time and continue adding to it. Ideas for additional features are welcome, and can be posted here!
Help & Support
Information on how to set up the plugin and run various tests can be found on the wiki. You need the permission stress.stress to be able to use the /stress command, and stress.tps to use the /tps (or /stps) command.
Have a question? Post in the discussion section for this plugin.
Found a bug / have a problem? Please report it here!
If you’re having problems with your computer and it isn’t behaving correctly in certain situations, then it could be a cause for concern. One of these situations could be when you are performing resource intensive tasks and the system becomes unstable or crashes while being put under stress. This could be a problem such as the CPU overheating and shutting itself down, or even the graphics card running into similar trouble. Or maybe the power supply simply cannot cope anymore with all hardware components running at full intensity…
Whether you’re someone who wants to test their PC components because they suspect a possible fault, or have bought / built your own PC and want to make sure it runs stably and reliably at maximum load, you need a program to be able to put the system under the desired levels of stress for periods of time to monitor the situation. Here are 10 tools (9 of them free) to do just that and put your system under huge amounts of stress to check for faults or problems.
1. HeavyLoadHeavyLoad is a utility that aims to stress the main component areas of a PC, namely processor, memory, hard drive and graphics. It can also run these tests individually or altogether which is obviously the time maximum stress will be placed of the system hardware and also the power supply. The Disk space and Free memory tests are not really there to put undue stress on those components, but rather continually writes a large file to the drive and allocates / deallocates memory to the system simulating heavy load when all major components are utilized.
There is an option though to add more stress to the hard drive by using Jam software’s other popular included tool Treesize Free to simulate more heavy disc access. HeavyLoad is available as portable and installer versions and is a very useful overall system stability tester to keep in the USB toolkit. Works on Windows XP to Windows 8 32-bit and 64-bit.
Download HeavyLoad
2. FurMark
Furmark is a stability and stress testing tool designed especially for graphics cards and runs a very intensive “Fur” rendering algorithm which is very good at pushing the GPU to its absolute limits. There are a few settings that can be changed such as resolution, full screen mode and anti aliasing, and a few presets are available such as running in the HD resolutions of 720 / 1080, or running a burn-in test for 15 minutes. The benchmark’s default run time and an alarm for the maximum allowable temperature for the graphics card is found via the Settings window.
Benchmark scores can be compared or viewed online. FurMark is compatible with Windows XP and above.
Download FurMark
3. StressMyPC
This is a simple, tiny and portable utility of around 20KB that can run a stability test on your single, multi core or multi threaded processor. In addition it can also perform a couple of other tests such as a simple GPU graphics test and also one for the hard drive. The “Paint-Stress” GPU test is enabled by default and the “HD-test” and a more aggressive CPU test which will push your processor towards 100% (the standard test used about 60% of a dual core CPU during testing) can be enabled by the buttons at the top of the window. StressMyPC works on all versions of Windows 2000 and above, including 64-bit.
Download StressMyPC
4. System Stability Tester
System Stability Tester works by simply using the well known and famous method of telling the computer to calculate the value of Pi up to 128 million digits. This will completely consume your processor for as long as the test runs and can also be used as a basic benchmarking tool to see how long it takes your CPU to calculate the specified number of digits. The range can be between 128 thousand up to 128 million and can be run continuously up to 50 times using up to 32 threads. There are 2 methods to choose from, Borwein and Gauss-Legendre which is also used by the classic SuperPi tool.
Works on Windows XP and above, portable and installer versions are available.
Download System Stability Tester
5. IntelBurnTest
Despite the name, IntelBurnTest actually works fine for testing on AMD processors as well, and is called as such because it makes use of the Intel Linpack libraries which Intel themselves use to stress test CPU’s. Usage is easy and all you have to do is set the number of times to run the test, the number of threads to use and the test stress level. This can be Standard, High, Very High or Maximum and if your available RAM is less than what the test requires, choose Custom and set the amount of memory to use accordingly.
The program is portable and runs on Windows XP and above.
Download IntelBurnTest
12Next › View All You might also like:
11 Tools to Find out Information About Your Computer’s Hardware5 Free Tools to Check and Test USB Flash Drives6 Free Programs to Check Your Video Card Memory For Errors8 Free Tools to Test Read and Write Speed of USB Flash Drives2 Ways to Test and Determine If Your BitTorrent Speed is Limited or ThrottledA nice collection of stress tests, but I am currently searching for DOS-based software. Will keep looking, but perhaps you could add something in this vein the next time you update the article?
ReplyBurninTest software is good for testing, but unfortunately it’s not free
Replyany commandline tools, i need them in my automation
Reply3d mark is good for higher end graphics cards
ReplyAida64 is also good program. It is almost head-to-head with BurnIn Test made by PassMark
ReplyI generally run Orthos and MemTest. For the hard disk, when I get a new one, I copy tons of files big and small to it and then try using these files. Last drive showed problems immediately after this.
I also always do a Nero Recode and x264 encodes since these are heavy CPU programs.
ReplyUseful tool and have noted contributors very helpful warnings.
ReplyLooks like a decent benchmarking software. Thanks Ray!
ReplyMy suggestion regarding this type of program:
Run it well BEFORE your warranty expires. Make sure you didn’t get a system with faulty components. Don’t experiment on an older system (with gigs of files & programs at risk). If something is “marginal”, these programs WILL find them – often destructively!
Server Stress Test Software
Second this – it is actually possible for stress testing software to fry your PC. E.g. normal use of a video card will not come close to the temperature and power consumption of running a 100% stress test like FurMark, and this could cause an otherwise working component to fail. It does mean the component is running out of spec, so it could even be recommended to run this just before your warranty expires, but not after.
ReplyAn example of how testing software can be destructive if it does not change or write anything new or over existing files, code or registry? If a tool writes its own fix without showing you changes before they happen then don’t use it.
ReplyThanks again for a useful tool Raymond
ReplyThank you Raymond.
Nice tool.
ReplyA very good and large hardware store here uses Everest for stability testing
ReplyThanks for the info Raymond!
Server Stress Tester
ReplyServer Stress Test
Leave a Reply